|Year : 2021 | Volume
| Issue : 5 | Page : 660-663
Evaluation of tensile bonding strength of permanent soft relining material to denture base acrylic resin after erbium:Yttrium–Aluminum–Garnet laser treatment – An in vitro study
Vinutha Varadharaju Kumari1, Ramesh K Nadiger2, Sami Aldhuwayhi1, Saquib Ahmed Shaikh1, Angel Mary Joseph1, Mohammed Ziauddeen Mustafa1
1 Department of Prosthodontics, College of Dentistry, Majmaah University, Al Majmaah, Saudi Arabia
2 Department of Prosthodontics, SDM College of Dental Sciences, Dharwad, Karnataka, India
|Date of Submission||24-Sep-2020|
|Date of Decision||10-Nov-2020|
|Date of Acceptance||24-Nov-2020|
|Date of Web Publication||05-Jun-2021|
Vinutha Varadharaju Kumari
Department of Prosthodontics, College of Dentistry, Majmaah University, Al Majmaah 11952
Source of Support: None, Conflict of Interest: None
| Abstract|| |
Purpose: The purpose of the study was to assess the effectiveness of erbium:yttrium–aluminum–garnet (Er:YAG) laser surface pretreatment at various pulse durations of exposure on increasing the tensile bonding strength of permanent soft relining material and acrylic resin. Materials and Methods: Polymethyl methacrylate resin samples were fabricated and grouped as comparison group (no laser surface pretreatment) and three test groups (received Er:YAG laser surface pretreatment at various pulse durations of 10 s, 20 s, and 30 s) for bonding with the permanent soft relining material, Molloplast B. Following the surface pretreatment, the samples were tested for tensile stress using a universal testing machine. Loads at the point of failure were noted and the tensile bond strength values were obtained. Parametric tests of one-way-ANOVA and Tukey's post hoc tests were done. Results: The highest tensile bonding strength was recorded in Group C, and the control group recorded the lowest bonding strength. Conclusion: Er:YAG laser surface pretreatment at 10 Hz, 3 W, and 300 mJ for 30 s improved the bonding strength of the permanent soft relining material to heat-processed acrylic resin material.
Keywords: Erbium:yttrium–aluminum–garnet laser, methylmethacrylate monomer, permanent soft relining material, polymethyl methacrylate, surface pretreatment, tensile bond strength
|How to cite this article:|
Kumari VV, Nadiger RK, Aldhuwayhi S, Shaikh SA, Joseph AM, Mustafa MZ. Evaluation of tensile bonding strength of permanent soft relining material to denture base acrylic resin after erbium:Yttrium–Aluminum–Garnet laser treatment – An in vitro study. J Pharm Bioall Sci 2021;13, Suppl S1:660-3
|How to cite this URL:|
Kumari VV, Nadiger RK, Aldhuwayhi S, Shaikh SA, Joseph AM, Mustafa MZ. Evaluation of tensile bonding strength of permanent soft relining material to denture base acrylic resin after erbium:Yttrium–Aluminum–Garnet laser treatment – An in vitro study. J Pharm Bioall Sci [serial online] 2021 [cited 2022 Aug 19];13, Suppl S1:660-3. Available from: https://www.jpbsonline.org/text.asp?2021/13/5/660/317559
| Introduction|| |
The importance of bonding strength of the soft relining material to the denture base is emphasized by many researchers and the bonding failure has mostly been attributed to the poor bond., To improve the bond strength, several surface modification methods, for example, mechanical roughening by sandblasting or lasers, chemical treatment, and mechanochemical treatment, have been investigated.,,, However, lasers have been found to perform well in enhancing the bond between the soft relining material and acrylic resin.,, Various lasers such as carbon dioxide (CO2), potassium-titanyl-phosphate (KTP) , neodymium:yttrium-aluminum-garnet Nd:YAG, and erbium: yttrium-aluminum-garnet (Er:YAG) lasers have been recorded to improve the bond strength.,,,, However, there is scanty evidence of the Er:YAG laser treatment of the exposed surfaces.
| Materials and Methods|| |
A customized two-piece die maker with the base as lower member and upper member with four mold spaces of dimensions 40 mm length and 10 mm × 10 mm cross-sectional area was used. Petroleum jelly was applied onto the mold and molten wax was flown in. One hundred and four wax blocks thus obtained were invested in dental flask by the conventional compression molding technique. Dewaxing was carried out and molds were cleaned thoroughly with soap and warm water. Samples of desired dimensions were fabricated using a conventional heat-processed polymethyl methacrylate (PMMA) denture resin [Figure 1]. The flasks were closed using a hydraulic bench press and bench cured for 60 min at room temperature. Processing was carried out at 74°C for 2 h followed by boiling at 100°C for 1 h using a temperature-controlled acrylizer. A total of 104 acrylic resin blocks were obtained to prepare 52 specimens, which were split into four groups of 13 specimens each based on the duration of laser surface pretreatment they received. Before the surface pretreatment, the surfaces to be bonded were prepared using sandpaper. The control group received no laser treatment and Groups A, B, and C received Er:YAG laser treatment at 10 Hz, 3 W, and 300 mJ for 10 s, 20 s, and 30 s, respectively.The research has been approved by the Majmaah University for Research Ethics (MUREC) (HA-01-R-088) with the number: MUREC-Nov.08/COM-2020/8-3.
The resin blocks were positioned at 90°to the laser tip at a fixed distance of 10 mm. R02-C: noncontact Er:YAG handpiece was used to treat the specimens [[Figure 2]-AT Fidelis Laser unit, Fotona, Slovenia] in pulse mode 10 Hz, 3 W, and 300 mJ with a long pulse duration for 10, 20, and 30 s. Brass die spacer of dimensions 3-mm length and 10 mm × 10 mm cross-sectional area was used as a spacer between two acrylic blocks before packing of the soft liner and invested in dental stone [Figure 3]a. Once the dental stone had completely set, deflasking was done and the brass die spacer was removed. Primo (Detax GmbH Co, Germany) adhesive was painted on the surfaces to be bonded and let to dry for 1 h before packing the soft relining material. The soft liner (Molloplast B) was packed and trial closure was done [Figure 3]b, excess Molloplast-B was removed. The flask was clamped and placed in an acrylizer. Processing was done by heating slowly to 100°C and maintained for 2 h as per the manufacturer's instructions.
|Figure 3: (a and b) Fabrication of specimens for testing tensile bond strength|
Click here to view
Testing for tensile bond strength
All the prepared samples were tested for tensile stress in a universal testing machine (Fine testing machine, Miraj) [Figure 4] at a crosshead speed of 5 mm per minute. On failure of the bond, the load was recorded in newtons (N) and used to obtain the tensile bonding strength in megapascals (MPa) using the below formula.
| Results|| |
The highest tensile bond strength was recorded in Group C (1.40 MPa) and the least with the control group (1.02 MPa). [Table 1] shows a significant difference in the tensile bonding strength of all study groups. The results of one-way ANOVA for tensile bonding strength of and among the groups showed a statistically significant difference [Table 2]. [Graph 1] shows a representation of the mean tensile bond strength of all the study groups.
|Table 1: Mean tensile bond strength values and standard deviation the study groups|
Click here to view
|Table 2: Results of one-way ANOVA for tensile bond strength between and within the study groups|
Click here to view
| Discussion|| |
For improving the bonding between soft relining material and denture base resins, several surface pretreatments are used such as mechanical, chemical, mechanochemical, and plasma treatment. Sandblasting was used to create irregularities on the bonding surface to provide mechanical retentive features., Sandblasting was advocated by Craig RG et al., although Amin WM et al. reported that it weakened the bond. Chemical surface pretreatment reportedly led to the bond failure of the soft relining material to the acrylic resin., Time-dependent property of plasma treatment makes the approach less effective, as delayed bonding can affect the bond strength.
According to Usumez et al., Nd:YAG laser surface treatment created surface irregularities on the acrylic resin resulting in better bond strength values. Akin et al. in a study concluded that Er:YAG laser treatment on PMMA was effective than the Nd:YAG laser and KTP laser treatment to increase the bonding of soft liner and acrylic resin. Furthermore, as reported by Tugut et al., Er:YAG laser surface pretreatment led to an improved bonding strength. Hence, Er:YAG laser treatment was studied in the current study.
The Er:YAG irradiation vaporizes the water content of the PMMA, leading to volumetric expansion and increasing the surface area. The Er:YAG laser handpiece with an integrated spray nozzle helps in the ablation of the PMMA surface while simultaneously cooling with air and water spray to avoid overheating. These small perforations created by Er: YAG laser ablation helps in penetration and retention of the soft liner and improves the bond strength. Tugut et al. studied the Er:YAG laser treatment at varying pulse duration and energy levels and reported that 300 mJ, 3W, and long pulse duration resulted in the highest mean tensile bond strength. However, the same treatment at 400 mJ, 4 W created larger pits and damaged the adhesive surface. Haghi et al. studied various surface pretreatments to improve the bonding strength of soft relining material to acrylic resin. They concluded that the Er:YAG treatment at 200 mJ at 10 Hz for 10s resulted in unsatisfactory bonding when compared to the no treatment group. However, due to conflicting results obtained by the previously mentioned studies, it opens doors for further studies. A systematic review conducted by Mudduganghadar et al. concluded that four of the six articles included for the review showed improved bonding following laser treatment of the acrylic resin. Hence, this study was formulated to assess the effectiveness of the Er:YAG laser treatment at 300 mJ and 3 W for 10s, 20s, and 30s to improve the bonding of soft relining material to the acrylic resin material. This study recorded the highest tensile bonding strength of 1.400 MPa with Group C, the least of 1.02 MPa with the control group, whereas Group B was 1.32 MPa and Group A was 1.25 MPa. At least 0.44 MPa bonding strength is needed for acceptable clinical uses according to Khan et al. Bond strength values following the Er:YAG surface pretreatments were higher than this value.
| Conclusion|| |
Er:YAG laser surface pretreatment had significant effects on the bonding of permanent soft relining material to the acrylic resin. Thus, to improve the bonding and longevity of the soft-lined denture, Er:YAG laser may be a good alternative to the conventionally available methods.
Financial support and sponsorship
Conflicts of interest
There are no conflicts of interest.
| References|| |
Sinobad D, Murphy WM, Huggett R, Brooks S. Bond strength and rupture properties of some soft denture liners. J Oral Rehabil 1992;19:151-60.
Feldmann EE, Morrow RM, Jameson WS. Relining complete dentures with an oral cure silicone elastomer and a duplicate denture. J Prosthet Dent 1970;23:387-93.
Amin WM, Fletcher AM, Ritchie GM. The nature of the interface between polymethyl methacrylate denture base materials and soft lining materials. J Dent 1981;9:336-46.
Sarac D, Sarac YS, Basoglu T, Yapici O, Yuzbasioglu E. The evaluation of microleakage and bond strength of a silicone-based resilient liner following denture base surface pretreatment. J Prosthet Dent 2006;95:143-51.
Jacobsen NL, Mitchell DL, Johnson DL, Holt RA. Lased and sandblasted denture base surface preparations affecting resilient liner bonding. J Prosthet Dent 1997;78:153-8.
Craig RG, Gibbons P. Properties of resilient denture liners. J Am Dent Assoc 1961;63:382-90.
Akin H, Tugut F, Mutaf B, Akin G, Ozdemir AK. Effect of different surface treatments on tensile bond strength of silicone-based soft denture liner. Lasers Med Sci 2011;26:783-8.
Usumez A, Inan O, Aykent F. Bond strength of a silicone lining material to alumina-abraded and lased denture resin. J Biomed Mater Res B Appl Biomater 2004;71:196-200.
Bolayır G, Turgut M, Hubbezoğlu, Doğan OM, Keskin S, Doğan A, et al
. Evaluation of laser treatment on reline base composites. J Adhesion 2007;83:117-27.
Tugut F, Akin H, Mutaf B, Akin GE, Ozdemir AK. Strength of the bond between a silicone lining material and denture resin after Er:YAG laser treatments with different pulse durations and levels of energy. Lasers Med Sci 2012;27:281-5.
Rodrigues S, Shenoy V, Shetty T. Resilient liners: A review. J Indian Prosthodont Soc 2013;13:155-64.
Akin H, Tugut F, Mutaf B, Guney U, Ozdemir AK. Effect of sandblasting with different size of aluminum oxide particles on tensile bond strength of resilient liner to denture base. Cumhuriyet Dent J 2011;14:5-11.
Zhang H, Fang J, Hu Z, Ma J, Han Y, Bian J. Effect of oxygen plasma treatment on the bonding of a soft liner to an acrylic resin denture material. Dent Mater J 2010;29:398-402.
Shimizu H, Ikuyama T, Hayakawa E, Tsue F, Takahashi Y. Effect of surface preparation using ethyl acetate on the repair strength of denture base resin. Acta Odontol Scand 2006;64:159-63.
Gundogdu M, Yesil Duymus Z, Alkurt M. Effect of surface treatments on the bond strength of soft denture lining materials to an acrylic resin denture base. J Prosthet Dent 2014;112:964-71.
Haghi HR, Shiehzadeh M, Gharechahi J, Nodehi D, Karazhian A. Comparison of tensile bond strength of soft liners to an acrylic resin denture base with various curing methods and surface treatments. Int J Prosthodont 2020;33:56-62.
Mudduganghadar BC, Mawani DP, Das A, Mukhopadhyay A. Bond strength of soft liners to denture base resins and the influence of different surface treatments and thermocycling: A systematic review. J Prosthet Dent 2020; 123:800-806.e6.
Khan Z, Martin J, Collard S. Adhesion characteristics of visible light-cured denture base material bonded to resilient lining materials. J Prosthet Dent 1989;62:196-200.
[Figure 1], [Figure 2], [Figure 3], [Figure 4]
[Table 1], [Table 2]